This is a 5 Pin (EP27) flashers LED electronic flasher relay for turn signal/hazard warn hyper flash flasher relay Specification: Technical Characteristics: Rated voltage: 12VDC Operating voltage:11VDC~15VDC Test voltage: 13VDC ± 0.2VDC Test temperature: 20? ± 2? Switch load: 0.1W ~ 150W(0.02A ~ 20A) Max power: 150W Flashing frequency: 60 ~ 120 times/minute Duty ratio: 30% ~ 70% Operating temperature: -40°C ~ +80°C Life: 400 working hours Wide Compatibility: 1994 1995 1996 1997 1998 1999 2000 2001 for Jeep Cherokee XJ models 2001 2002 2003 2004 2005 2006 for Jeep Wrangler TJ models 2007–2017 for Jeep Wrangler JK select models Instructions : 1. Flameout, find your model's flasher relay location, Pull it out; 2. Check the factory flasher relay if is 5 pins, if not, this item would not fit your models; if is 5 pins, it will fit; 3. Plug in this item on where factory flasher relay location; 4. Start car power, test whether the functions of the left, right turn signals and warning lights of the automotive are normal. NOTE: If this item will keep ringing when working, most of case the automotive maybe there is a short circuit, in this case, need to find where is short circuit and deal with well, then the item will work in normal