Gorilla® Dries Clear Wood Glue is an easy to use, incredibly strong and water resistant PVA glue that dries crystal clear on wood surfaces. Directions: 1. Clean and dry surfaces to be bonded. 2. Shake well before use. 3. Apply glue generously to the surface. *For ideal product performance, apply glue on wood to wood substrates. 4. Join and clamp for 20-30 minutes. Parts should fit tightly. 5. Excess glue can be removed with a clean, wet cloth or scraped off after glue dries. 6. Allow bond to dry for 24 hours. 7. Remove applicator tip to clean out glue build up. NOTE: Application temperature should be at or above 55°F. Before finishing, sand surfaces to minimize glue exposure. Not recommended for structural or load bearing applications and not for continuous submersion or below-waterline use. Pro Tip: For ideal formula performance, use adhesive on wood to wood substrates. Click on the Gorilla link at the top of this page to see more Gorilla Tough products.