Installation Steps: 1. Drill two pilot holes in the location where you want to mount the picture light. Place screws (included) in pre-drilled holes. Tighten slightly until secure, but do not tighten all the way. Slide EZ Mount Bracket keyhole slots over screw heads and into position. 3. Make sure the mounting bracket is level before securing it to the wall. 4. Once you confirm that the bracket is level, tighten the screws to secure it to the wall. Take care not to over tighten. 5. To hang the picture light on the mounting bracket, align the picture light with the mounting bracket and slide the unit down. Picture light will lock into position. 6. To remove the picture light from the mounting bracket: A) Hold the picture light by the base (not light head). B) Slide the unit up. C) Once the body releases from mounting bracket, pull the unit out. PACKING LIST - 1 x Picture Light -1 x Remote Control - 1 x USB cable - 2 x Screw