?Features? Ideal for office storage organizers or personal file cabinets. Lock boxes are lightweight, with chrome handles easy to carry and store. Double protection with its dual combination lock system. Made of reinforced aluminum alloy for good corrosion resistance. ?Instructions for Use? How to Set Your Combination Lock (For File Organizer Storage Box) Before You Begin: ? Important: Perform this setup on a flat, well-lit surface. Do not force the locks if they resist movement. Step 1: Unlock & Reset to Default (0-0-0) Cut the plastic security ties around the number wheels (if present). Confirm the default code is 0-0-0. ? If wheels do not show 0-0-0: Gently rotate each wheel until all zeros align. Slide the button AWAY from the dial (? direction) to open the lock. Step 2: Set Your New Combination Slide the button TOWARD the dial (? direction) and hold it down. While holding the button: Rotate each wheel to your desired 3-digit code (e.g., 3-2-1). ? Pro Tip: Avoid simple codes like 0-0-0 or 1-2-3. Release the button to lock in your new code. Step 3: Test & Secure the Lock Close the latch firmly into the slot until you hear a "click." Test your new code: Spin the wheels to random numbers. Re-enter your set code – the lock should open smoothly. ? If it fails: Repeat Steps 1-2 (ensure you held the button while setting the code). Troubleshooting Tips: ? Lock won’t open with new code? Reset to 0-0-0 and retry Step 2. Check for wheel misalignment – gently wiggle wheels while entering code. ? Button is stuck? Apply a small amount of silicone lubricant (do not use oil). Visual Guide: ? Default Position: 0-0-0 with button slid ? (open). ? Setting Code: Button held ? while adjusting wheels. ? Success: Latch clicks shut when closed.